[Russell Thames]

Thanks. Look forward to hearing if it works.

[Russell Thames]

John,

I’ve tried to manually frame in the openings in the gable wall and have done so by adding/ altering the framing first. Then when I turn on the right & left sheathing layer to cut out the opening it reverts all framing back to the original wall layout. Should I be cutting my openings in sheathing first?

[Russell Thames]

No problem. As an example, a 2×4 framed wall against a poured basement wall. Sometimes they’re drawn as a standard depth wall gaped off the foundation wall by 1/2″ and other times the studs are turned on edge so the 1-1/2″ dimension of the stud is the depth of the wall (instead of the 3-1/2″), plus the 1/2″ gap for airspace or rigid insulation.

Hope that makes more sense.

Russell

[Russell Thames]

John,

I was also wondering if it there was an option for setting the main header width to 0 so that either or both of the header plates could be turned on?

Russell

[Russell Thames]

John,

Thanks for letting me know. I’ll model the gable ends that way. Just wanted to make sure it wasn’t a user error on my end or some other thing that I was missing. Loving the framer plugin.

Thanks again.

[Author]

Posts